I have a 2009 Palomino Pony P280. Ended up building a new roof from plywood and covering it with TPO rubber roof membrane.
one problem I did encounter with the roof membrane was it would twist a bit when I had to put screws in for the external hardware.
I rebuilt my roof on a 2009 Palomino Pony P280 due to Mold and rotten wood on the ends. The old roof had a metal cladding, but it was glued to the rotten wood and I could not save it.
When I rebuilt I used good one side plywood and covered with a roofing membrane from CanadaRV.com out of...
That's going to be a tough one.
I would almost say something like PL300 construction adhesive, but it might be to thick and leave it raised a bit. You might get away with wood glue (Titebond III is a waterproof glue that cleans up easy).
I have a 2008 Palimony Pony P280. I would love to put some larger tires on it but not sure where to start. I just finished rebuilding the top from scratch and I think its a bit heavier now. BTW, What's the best way to weigh the trailers and tongue weight.
When it comes to trailer TRAFFIC lights, I believe they take all of there signaling from the vehicle. There should not be any relays on the trailer at all for traffic signals or brakes signals.
I don't have your vehicle or trailer, but as a general rule when isolating trailer wiring...
Thanx, I have the top Channel re-installed now, I was not sure if screws were added after the tentage is in the channel or if the channel fold was enough to hold it in place. I guess I will need to look and see if there are any holes in the tentage.
Good day Troops
I have almost completed the rebuild of my Tent trailer roof and looking to see if someone can send me a few photos so I can finish up.
I have a 2009 Palomino Pony P280 by Forest River.
I have completely rebuilt the top but when checking my pre disassembly photos, I missed a...