Search results

  1. K

    Thermostat Troubles with Furnace

    Yeah sorry about that. When I looked it up, I used Amazon and it said it was a 24 volt TStat. Definitely try new batteries and test stat when it’s not connected. Make sure u hear it click when there is a call and that it doesn’t seem to dim out too much. Also test and make sure your furnace...
  2. K

    Thermostat Troubles with Furnace

    Your thermostat is designed for 24 volts. Furnace probably only runs off of 12 volts. If TStat dies out when it tries to light it’s probably because it’s dropping to too low of voltage for TStat to stay on. I would check voltages and confirm this. But I tried adding a digital one in my camper...
  3. K

    Coleman popup ABS roof repair on a 2000 Westlake

    I think I would just fill holes with bondo and then do a lite sand to make it smooth and even. I believe it would be a more solid surface, with less expanding and contracting with diff. Weather temps. It would go faster without having to use tape and just fill holes with a putty knife like u...
  4. K

    Dometic Fridge issues; advice needed

    One last thing. I don’t see one in the diagram but, look on the flue for something like in the pics I’ll post. And if u see one, try and push the little button to reset it. Also I’ll shut up now. I keep thinking about more troubleshooting stuff. Hope that helps.
  5. K

    Dometic Fridge issues; advice needed

    Yep. Looks like the little 3 amp fuse is your control system and it runs 12 volts through it. If You test for dc power on both sides of that fuse and have 12 volts with one lead to ground. Then the board is most likely your problem. The 30 amp fuse is for the DC heater and the 5 amp fuse is for...
  6. K

    Dometic Fridge issues; advice needed

    Yeah think that’s your button display on the other side maybe. I doubt that’s it. Still looking at diagram and trying to figure out what everything is doing. The diagram may be the same. But it looks like the board may have been changed. Cause if I look for that part online the board looks a...
  7. K

    Dometic Fridge issues; advice needed

    Also, it’s hard for me to tell but, it looks like there are 2 boards. The second one looks like it has a 3 amp and 5amp fuse on the 12 volt side. Where the board u showed us has fuses on the 120 volt side. But I don’t see that board in any of my searches. May need to follow some wires and or dig...
  8. K

    Dometic Fridge issues; advice needed

    To recap check for 12v dc from the terminal that was loose to the white wire terminal next to it. And then do the same just above that from the red wire terminal to the black wire one next to it. If u have volts there. Then check at the 3volt and 5 volt fuses for AC power 120 volts. Find a good...
  9. K

    Propane furnace not staying lit

    So my thought is this. I’ve worked on trailer style furnaces. I pulled up a diagram of that furnace. And sometimes, tiny little spiders like to make webs in those tiny little holes that the gas pushes out of. Usually it’s at the gas valve itself. Yes u have to take it apart. Nothing should be...
  10. K

    Coleman popup ABS roof repair on a 2000 Westlake

    I wish I had never started the MEK goo thing, where u drill holes and then make a small grove and fill it. I spent more time back filling with bondo after I did all that. If I would have just started with tearing off the old ABS and giving it a quick sand there would still have been some bondo...
  11. K

    Coleman popup ABS roof repair on a 2000 Westlake

    Didn’t put mine back on. I’d rather not have to do the roof project again. It was a lot of work and I’m ok with not having an awning or buying a cheap 4 pole awning that I can through in and take with. If your gonna try adding one I would do it the original way the manufacturer suggested. I...
  12. K

    Need Advice on Buying Camper

    I like having the shoilet in my pup. If I ever buy another one it’ll have to have one. I like being able to take a quick military style shower before bed. Especially after a hot day out hiking or fishing. Not all camp sights have a shower house. We don’t use the toilet part of it very often. But...
  13. K

    WD hitch

    Take the sway bar apart and clean all the silicone off. The metal bar and friction pads should be clean. If u can’t get them clean enough buy a new sway bar. Make sure all your packed stuff in the camper is in the front storage or at least closer to the tongue. Make sure the camper tires are at...
  14. K

    Coleman popup ABS roof repair on a 2000 Westlake

    I only had 2 covers on mine and they were for the roof brace on the inside. The brace gives more roof stability when u have an AC on top. I bought the replacement covers from colemanpopupparts.com I did the 2 part epoxy to attach. DO NOT try and remove ABS around latches. Cut out around them and...
  15. K

    The little fridge is not acting like 3 way??

    Check and make sure u don’t have a tripped GFCI at one of your outlets on 120. And the flame sensor or probe or thermocouple may need replaced or u just need to hold it down longer. I would try holding the gas valve on for like 2 minutes or even more before u rule the sensor bad
  16. K

    Coleman popup ABS roof repair on a 2000 Westlake

    Mine never worked. It was pretty much shot when I got the camper. I’m not sure about attaching it with glue or double sided 3m tape. I don’t know if I’d trust it to stay. I would do like sjm9911 suggests if I was going to add one. I’ve never really needed it. I repaired the one bracket that I...
  17. K

    Coleman popup ABS roof repair on a 2000 Westlake

    Yep check for inner cracks and breaks. If all is good sand down. Fill with bondo if u want (I think that’s kind of a yes I want it smooth or I don’t care kind of choice it’s up to u). I don’t think the water really hurts the top unless it’s prolonged for a long time but I’m not sure. I do...
  18. K

    Coleman Bayside no power on battery

    I agree with most of them. The easiest way to see if converter is working, is to check at the reverse polarity fuse. With it plugged in to shore power, u should have 13.6 volts DC on both sides of the fuse to ground. Leave the fuse plugged in and test with your multimeter leads from each post...
  19. K

    Coleman popup ABS roof repair on a 2000 Westlake

    This is what I bought and where I bought them from. You can squeeze the molding side in a little if u need to. I would suggest watching a video on how to install it. That’s how I did it.
  20. K

    Coleman popup ABS roof repair on a 2000 Westlake

    Had it built by a mechanical contractor. Check my thread on it. I borrowed prints from another member and made a few adjustments that she had suggested.




Top